TRACK TRACTORS

2002 JD 9520T, ps, 4 hyd., 3 pt., Greenstar ready, 36" tracks, hrs. unknown, S/NRW9520T901112

2003 JD 9420T, powershift, 4 hyd., HID lights, AutoTrac ready, front suitcase weights, wide swing drawbar, 36" belts, 3,050 hrs.

1997 Case-IH 9370 Quad Trac, CAH, powershift, 4 hyd. with Case drain, auto steer ready, front weights, approx. 6,400 hrs., undercarriage 80%, (1) new belt, others 70%, complete maintenance records available

4WD TRACTORS

2003 JD 9520, ps, deluxe cab, 4 hyd., instructional seat, HID lights, 3,000 lb. weights, 710/70R42 duals, 3,800 hrs., S/NRW9520P011111

1994 Ford NH 9880, 4WD, 4 hyd., front weights, rear top & bottom weights, performance monitor, 710 Trelleborgs, 60% rubber, S/ND101656

1995 Case-IH 9250, powershift, 4 hyd., diff lock, 18-4-42 duals, 9,431 hrs., S/N2016879

2002 NH TV140 bi-directional, 3 pt., draw bar on both ends, aux. hyd. on front, PTO, 480/85R34 tires, 3,779 hrs. with Miller bucket & grapple, S/N19559

1998 NH TV140 bi-directional, 3 pt., draw bar on both ends, aux. hyd. on front, PTO, 16-9-38 tires, 2,780 hrs. with Peloquin bucket & grapple, S/N203821

Case-IH 2670, 4 hyd., powershift, 20-8-34 duals, S/N8793265

1978 Versatile 875, 12 spd. gear, 4 hyd., 20-8-38 duals, 14,753 hrs., S/N52844

MFWD TRACTORS   

2006 JD 8330, ILS front, powershift, Active seat, HID lights, deluxe cab, deluxe comfort, 5 hyd., 3 pt., quick hitch, 3 PTOs, 450 lb. rear weights, front suitcase weights, AutoTrac ready plug & play, 380R54 press steel duals, 90% rubber, 380R38 front factory duals, fenders, 2,600 hrs.

2004 JD 7920, IVT, 4 hyd., 3 pt., PTO, Active seat, HID lights, quick hitch, AutoTrac ready, 320-80R50 press steel duals, 2,035 hrs.

2003 JD 8320, ILS front, powershift, Active seat, HID lights, deluxe cab, deluxe comfort, 5 hyd., 3 pt., quick hitch, 450 lb. rear weights, front weights, AutoTrac ready plug & play, 380R50 press steel duals, 380R34 front factory duals, front fenders, 4,080 hrs.

2004 JD 8420, ps, 4 hyd., 3 pt., 1000 PTO, Greenstar ready, 14-9-46 tires & duals, 320/85R34 fronts, 5,145 hrs., S/NRW8420P028323

2008 JD 7730, deluxe cab, AutoTrac ready, IVT, right hand reverser, 3 hyd., 3 pt., 540/1000 PTO, 380-90R50 tires & duals, 320/85R38 fronts, 226 hrs., S/NRW7730D009600

1994 JD 4960, powershift, 4 hyd., 3 pt., quick hitch, PTO, 14-9-46 press steel duals, 14-9-30 fronts, front weights, 10,100 hrs., S/N5601

1986 Case-IH 3394, powershift, 4 hyd., 3 pt., PTO, new 380-85R46 tires & duals, 11,214 hrs.

1979 Ford 1500, syncro, 3 pt., PTO, turf tires, 896 hrs., S/N502997

2WD TRACTORS

1975 JD 4630, powershift, 2 hyd., 3 pt., 1000 PTO, aux. fuel tank, 18-4-38 band duals, 8,677 hrs., S/N15420

1973 JD 4630, syncro, 3 hyds., 3 pt., PTO, 20.8x38 singles, S/N4630W003061

JD 4630, 3 hyd., (2 converted), 5,112 hrs., S/N005227R

1974 JD 4430, quad range, 3 hyd., 3 pt., quick hitch, 540/1000 PTO, 14-9-38 singles

JD 4520, syncro shift, Year Round cab, 2 hyd., 3 pt., 1000 PTO, fenders, lights, with JD 158 loader

1979 JD 2440, open station, ROPS, diesel, 60 , 2 hyd., 3 pt., PTO, with JD 146 hyd. loader, 3,932 hrs., S/N324887

1964 JD 4010, diesel, hyd., 3 pt., 540 PTO, fenders, new brakes, complete hyd. OH, new paint, nice tractor

1961 JD 4010, diesel, open station, 2 hyd., 3 pt., 540 PTO, 15-5-38 singles 11613

1983 Ford 6610 with 1995 Kuhn disc mower, DNR machine, 3,485 hrs., excellent service, S/NC708677

1968 IHC 856, diesel, 2 hyd., 3 pt., 540/1000 PTO

1974 IHC 766, cab, heat, diesel, 2 hyd., 3 pt., PTO, 18-4-38 rear singles, S/N24901804012991

1964 IHC 706, open station, gas, 1 hyd., 3 pt., PTO, 18-4-34 rear singles, shows 7,030 hrs., S/NNA10950

1974 Oliver 1655 with Koyker loader, S/N262908-490

AC D17, wide front, power steering, spin out rear wheels, 16-9-38 tires

1954 AC WD, wide front, operators manual, S/N174369

1959 Case 600-B, gas, wide front, 12 spd. hand clutch, power steering, 3 pt.

1941 Farmall H tractor with Woods L306 belly mower

Ford 800 Jubilee engine doesn't run

IHC Super M, wide front, hyd., PTO

1944 IHC H, narrow front, 12v system, 40% rubber, restored

1949 JD B, narrow front, PTO

MM 4 Star, wide front, power steering, 3 pt., 15-5-38 tires

SPRAYERS   

2009 Apache AS1010 self-propelled sprayer, 215 Cummins, 6 spd. powershift, 120” fixed axle, 1,000 gal. tank, 100' boom, foam marker, fence row left & right nozzle, autoboom ultraguide, Smartrax auto steer, Accuboom, auto shut-off, 380-80R-38 fronts, 380-90R-46 rears, hyd. suspension

2000 Ag Chem 854 Rogator, 1,000 gal. SS tank, 90' boom, 50 gal. rinse, hyd. tread adj., triple nozzle, Raven monitor, foamer, GS harness, 320R46 tires, 90% rubber, 2,175 hrs.

2003 Redball 680 sprayer, 132' boom, 1,600 gal. tank, rinse tank, hyd. drive pump, Raven 450 controller, 320-38 duals, 88" minimum wheel spacing, S/N03-01787

2001 Hardi Commander pull-type sprayer, 80' boom, 1,200 gal., triple nozzle, Raven 471 auto rate monitor, 14-9-46 singles, PTO pump, hyd. full controls, rinse tank

Melroe 115 spra-coupe, 160 gal., 52' boom

Summers sprayer, 3 pt., 60', 500 gal. tank

COMBINES

2008 JD 9770 STS, high torque reverser, high cap. unload, deluxe controls, 20-8-42 duals, 650 sep. hrs.

2006 Cat Lexion 580R, straddle duals, Cebi monitor system, Quantum yield monitor with printer, HPV variable speed feeder house, rear wheel drive, 3D sieve system, long auger, 230 sep. hrs., 420 engine hrs., single owner, S/N57600358

2004 JD 9760 STS, deluxe controls, Contourmaster, high unload pkg., Greenstar Y&M, 18-4-42 straddle duals, 18-4-26 rears, 1,200 sep. hrs., 1,628 engine hrs.

2003 JD 9650 STS, straw chopper, rock trap, fore/aft, header height control, reel speed control, grain tank ext., 18-4-42 duals, 1,680 sep. hrs., S/NH09650S700639

2004 Case-IH 8010, rock trap, chopper, long auger with Stewart extender, elec. adj. sieves, Pro 600 color display with Y&M, HID lights, all updates, rotor balanced, new rotor bars, 9:00 metrics, 540 rears, 1,235 sep. hrs., 1,653 engine hrs., S/N105374

2005 Agco Gleaner R65, auto header height, reel speed, fore/aft, Field Star mapping, Y&M, Sunnybrook rotor, low hrs. on new engine, completely reconditioned, 8:00 metric singles, heavy duty adj. rear axle, 1,459 sep. hrs., 2,226 engine hrs.

1998 Agco Gleaner R72 auto header height, reel speed, fore/aft, ext. reconditioning, 30-5-32 singles, 1,660 sep. hrs., 2,427 engine hrs.

1995 Case-IH 2188, axial flow, specialty rotor, rock trap, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 2,532 sep. hrs., 3,325 engine hrs., S/N189834

1997 Case-IH 2188, AFX rotor, dual speed cyl., hopper ext., grain loss monitor, 30.5-32 singles, 3,919 sep. hrs., 5,130 engine hrs., S/NJJC0193772

1995 Case-IH 2188, specialty rotor, AHH, RS, grain loss monitor, Crary Big Top, new reverser, 30-5-32 singles, HD rear axle, 2,498 sep. hrs., 3,454 engine hrs., S/NJJC0118907

1994 Case-IH 1688, specialty rotor, rock trap, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 4,343 engine hrs., S/N121880

1994 Case-IH 1688, specialty rotor, rock trap, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 4,850 engine hrs., S/N121707

1994 Case-IH 1688, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 3,437 engine hrs., S/N121084

1994 Case-IH 1688, axial flow, specialty rotor, rock trap, chopper, 2 spd. hydro, field tracker, long unload auger, AHH, RS, fore/aft, 30-5-32 singles, Gorden bars, 3 strand feeder, AFS yield & moisture, 4,900 engine hrs.

1992 Case-IH 1680, specialty rotor, rock trap, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 4,133 engine hrs., S/N117249

1992 Case-IH 1680, axial flow, specialty rotor, rock trap, chopper, AHH, RS, fore/aft, 30-5-32 singles, 14-9-24 rears, 2,400 sep. hrs., 3,100 engine hrs.

1997 JD 9600, DAM, DAS, chaff spreader, long auger, 30-5-32 singles, 14-9-24 rears, S/N671428

1994 JD 9600, DHH, fore/aft, DAS, long auger, 30-5-32 singles, 14-9-24 rears, chaff spreader, 3,660 sep. hrs., 5,331 engine hrs.

1990 JD 9600, DAM, DAS, 20' unload auger, chaff spreader, 30-5-32 singles, 14-9-24 rears, S/N637634

1985 JD 8820 Titan II, AHH, air sieve, hyd. fore/aft, 30-5-32 singles, 6,341 hrs., S/N611137

JD 6600, diesel, gear drive, new cyl. bars, radiator 1,000 acres ago

1978 MF 550, Perkins 354 diesel, chopper, tall hopper, variable speed, 18-4-26 tires, 2,900 hrs., mostly stored inside, good condition

CORN HEADS

2006 Geringhoff corn head, 12x22”, 60 Series drives, S/N915761222

2005 Geringhoff RD corn head, 12x22”, hyd. deck plates, header height, stubble lights, S/N2512221B

2004 Geringhoff RD corn head, 12x22”, hyd. deck plates, header height, stubble lights, S/N92114122B

JD corn head, 12x22”, PTO hookups, field ready

Agco Hugger corn head, 8x30”, new chopping rolls

Caterpillar corn head, 12x30”, knife rolls, hyd. deck plates, mounts for Case-IH 8010

2001 JD 1290 corn head, 12x20",  S/N695708

1998 JD 1290 corn head, 12x20”, low profile, poly, standard rolls, standard deck plates,  S/NX675672

JD 1241 corn head, 12x22”, GVL poly 6000

JD 843 corn head, 9x22”, low tin, oil drive

FLEX HEADS

2007 Cat Lexion F535 flex head, S/N44100434

2005 JD 635F flex head, 35', poly snouts, 70 Series hookups, full finger auger, S/NH00635F712085

2005 JD 635F flex head, 35', poly snouts, 60 Series hookups, poly auger fingers, tall DAM, S/NH00635F710968

2005 JD 630F flex head, 30', poly snouts, 70 Series hookups, full finger auger, low DAM, Crary air reel, S/NH00630F710794

2003 JD 930F flex head, 30', poly snouts, full finger auger, 50 Series drives, S/NH00930F701495

2001 JD 930F flex head, 30', poly snouts, full finger auger, 50 Series drives, S/NH00930F691496

1998 JD 930 flex head, 30', poly snouts, 10 Series drives, S/NH00930F677378

1981 JD 224 flex head, AHH, poly skids, telescoping shafts, S/N475475

JD 224 flex head, steel fingers, stainless steel tin bottom

JD 220 flex head, steel fingers, auto header height

1999 Case-IH 1020 flex head, Crary air reel, fore/aft, poly, S/N319704

1997 Case-IH 1020 flex head, poly bottom, 30', fore/aft

 Agco Gleaner R Series flex head, 24', poly bottom

 MF flex head, 20’

STRAIGHT HEADS

2004 Agco 8000 straight head, 30', bat reel, fore/aft, 600 acres on new guards & sections

1995 Case-IH 1010 straight head, 30', bat reel, fore/aft, S/N200780

1994 Case-IH 1010 straight head with SSR pump, 9” pans, S/N128605

JD 930 rigid platform, (3) Sund 9' pickup platforms, AHH, screen bottom

JD 224 straight head, pro plates, bat reel

Deutz straight head, 27', with 9” sunflower pans, S/N8787

 MF straight head, 16'

PICKUP & OTHER HEADS

2001 Cat G13 platform with Rakeup platform

Agco 400 pickup head, Westward 388 pickup

Agco 400 pickup head, Westward 436 pickup

1994 JD 914 pickup head, JD 7-belt pickup, S/N665396

1982 JD 212 pickup head, JD 6-belt pickup, S/N438632

JD 212 pickup head, 6-belt JD pickup, S/N585142

MF pickup head, 10', Melroe rubber belt pickup

MF pickup head, 10' Melroe steel belt pickup

Sund pickup, 20'

JD all crop head, 8x22", conversion head, S/N295342H

Agco sunflower head, 27', 12” pans

Universal UH22 bean head, 22’, 8-bar pickup, S/N390049

SWATHERS

JD 580 pull-type swather, 25', bat reel

Premier pull-type swather, 21', auto fold, finger reel

GRAIN CART & GRAVITY BOXES

2006 Brent 1084 grain cart, 1,050 bu., roll tarp, 480/80R42 duals, S/NB22750121

JD 1210A grain cart, 400 bu., 1000 PTO, roll tarp

Dakon gravity box, 150 bu., running gear

(2) Parker gravity boxes, 125 bu., running gears

SKID STEERS

2006 Caterpillar 246B skid steer, aux. hyd., 202 hrs.

2006 Caterpillar 226B skid steer, aux. hyd., 404 hrs.

2005 Caterpillar 287B track skid steer, cab, aux. hyd.

2002 Melroe T190 track skid steer, aux. hyd., 2,200 hrs., S/N519313266

2001 JD 270 skid steer, cab, heat, aux. hyd., new tires, std. bucket

2001 NH LS180 skid steer, ROPS, 2 spd., aftermarket hand controls, std. bucket, 12-16.5 rubber, 2,536 hrs.

NH LS170 skid steer, cab, aux. hyd.

1985 Rounder L1000 skid steer, gas engine, standard bucket

1999 Bobcat 873 skid steer, cab, heat, front hyd., hand controls, 2,605 hrs.

1981 Gehl 3510 skid steer, Ford 4 cyl. gas, standard bucket, manure fork, grapple, 3,000 hrs., new engine & radiator

JD 240 skid loader, aux. hyd.

Bobcat 753 skid loader, non-runner

Caterpillar skid loader track assembly, like new

Caterpillar wheel loader quick tach fork assembly

Pallet forks, 4'

Pallet forks, 5'

LOADERS

JD 840 heavy duty loader, 96” bucket, armrest joystick control, mounts for 8000 Series

Davis quick tach loader, mounts, 6' bucket

Dual 250 loader for IHC 560

Du-Al 340 hyd. loader, grapple & control valves with brackets for JD

Ford 700 quick tach loader

Ford 420 skip loader with box blade

HEAVY EQUIPMENT

Caterpillar D5HLGP High Track with pyramid pads, 33,000 lb., 6,000 hrs., new undercarriage

2003 IR BL475 backhoe loader, quick change bucket, canopy, SS, hoe bucket, front aux. hyd., 9,640 lbs. gvw, 491 hrs., S/N571911013

2000 Sky Trac 154 telescoping forklift, diesel, 10,000 lb. lift, 54', heated cab, 3,500 hrs., 4 months extended warranty

2000 NH LM850 rough terrain forklift, open cab, diesel, 10,000 lb. cap., ext. boom to 39’

2000 SkyJack 3219 scissor lift, 32” wide, 25' working height, non-marking tires, built-in charger

1999 Komatsu SK60 trackhoe, push blade, long stick, 40” bucket, 17,000 lb. weight, good undercarriage

1995 JD 690ELC excavator, 72” ditching bucket, 8,000 hrs., extensive reconditioning with records

JD 490D excavator, std. stick

1995 Pettibone telehandler, diesel, front tires filled with foam, 2 wheel, 4 wheel & oblique steering, leveling 8,000 lb. lift

1989 Komatsu D68E dozer, 180 , 4-way blade, 6,000 hrs., new undercarriage

1987 JCB rubber tire backhoe, cab, diesel, 2WD, 18” trench bucket

JD 444G wheel loader, enclosed cab, GP bucket, 15-5-25 tires

1984 Ford 555A loader backhoe, XL Extend-a-hoe, DNR machine, 2,728 hrs., excellent service

1976 JD 450E dozer, 6-way blade with guards, 2,000 hrs.

Caterpillar 318 backhoe general purpose bucket

Caterpillar push blade, off 433 sheepsfoot packer

Galion 150A rough terrain crane, 15 ton

Hough R30 wheel loader, power steering, 1 yd. bucket, new clutch & starter

1978 Ford A64 front end loader, 2-1/2 yd. bucket, DNR machine, excellent service, S/NC587210

1967 Hough 50C payloader, 301 gas, 3rd valve, 1-1/2 yard bucket, 4-tine grapple, 7,000 hrs.

FORKLIFTS

2000 Caterpillar TH63, enclosed cab, heat, 42', 4x4, 3-way steer

2005 Daewoo G25E forklift, pneumatic tires, 188" lift, 3-stage mast, side shift, dual fuel

1995 IR RT708G forklift, 3.8 liter Cummins, 75 , 15' mast, 6,000 lb. lift, 4' forks, 2 stage hyd., 18-4-24 fronts, 11L-16 rears, 15,000 gvw

MF F2500 forklift, tractor-style

Carelift 4,000 lb. forklift mast with forks & quick tach

NON-SLEEPER SEMI TRACTORS

2006 Kenworth T600 twin screw, C13 Cat, 10 spd., sliding 5th, flex ride susp., daylight doors, 24.5s on polished aluminum, new virgin tires

2005 Freightliner Columbia twin screw, Detroit 14L, 515 hp, auto shift, 180” WB, 24.5s on polished aluminum

(2) 2004 IHC 9200I twin screw, C12 Cat, auto shift, 205” WB, 22.5s on polished aluminum

2004 Freightliner Columbia twin screw, C15 Cat, 10 spd., stretched & double-framed for 21' box, 22.5s on aluminum

(2) 2002 IHC 9400I twin screw, Eagle interior, Cummins ISM, 370 hp, 10 spd., 187” WB, 22.5s on polished aluminum

2002 Freightliner Columbia 120 twin screw, Detroit, 470 hp, engine brake, 10 spd., air liner susp., 3.42 ratio, 12,000 lb. fronts, 40,000 lb. rears

2002 Freightliner CL120 Columbia twin screw, Cummins ISX, 475 hp, engine brake, 10 spd., 3.90 ratio, 40,000 lb. rears, 235” WB, 24.5s on aluminum

2001 Freightliner 106 twin screw, Detroit, 9 spd., 22.5s

2000 IHC 9100 twin screw, C10 Cat, 350 hp, 10 spd., 22.5s with polished aluminum front

2000 Freightliner 120 twin screw, 3406 Cat, 10 spd., engine brake, 22.5s, aluminum fronts

2000 Freightliner Century twin screw, Cummins ISM, 10 spd., 22.5s, aluminum all around

1999 IHC 9100 twin screw, N14 Cummins, 10 spd., 22.5s, aluminum fronts

(2) 1999 Freightliner FLD112 twin screw, C12 Cat, 10 spd., air ride, low miles

1999 IHC 9200 twin screw, M11 Cummins, 370 hp, 10 spd., air ride, 180” WB, 22.5s on discs

1999 IHC 9200 twin screw, C12 Cat, 380 hp, 10 spd., air ride, 215” WB, 22.5s on discs

1999 Kenworth T800 C12 Cat, 410 hp, 10 spd., 3.70 ratio, 12,000 lb. fronts, 40,000 lb. rears

1998 Volvo VNL twin screw, M11 Cummins, 370 hp, 10 spd., 22.5s, aluminum fronts

1998 Freightliner FLD121, factory day cab, Detroit 11 liter 60 Series, 350 hp, Spicer trans., 7 spd. Rockwell rear end, 2:93 ratio, 171” WB on steel, 12,000 lb. front, 40,000 lb. rear, A/C, cruise, approx. 700,000 miles

1998 Freightliner FLD120 factory day cab, Detroit 11 liter 60 Series, 350 hp, Spicer trans., 7 spd. Rockwell rear end, 2:93 ratio, 171” WB on steel, 12,000 lb. front, 40,000 lb. rear, A/C, cruise, approx. 700,000 miles

1997 Volvo twin screw, 60 Series Detroit 12.7 liter, 10 spd., 4:33 ratio, 24.5s, steel discs

1997 Freightliner 112 twin screw, M11 Cummins, 10 spd., sliding 5th, 22.5s, polished aluminum around

1997 IHC 9400 day cab, N14 Cummins, Red Top, 470 hp, Super 10 spd., air slide 5th, air ride susp., 160” WB, low pro 24.5 tires

1997 Volvo WG single axle, VED 12, 10 spd., air ride

1996 IHC 8300 twin screw, Detroit 60 Series, 10 spd., low miles

(2) 1995 Volvo twin screw, 60 Series Detroit, 10 spd., engine brake, 22.5s, steel discs

1995 Volvo twin screw, M11 Cummins, 9 spd., 24.5s on steel discs

1995 Ford LTA9000 AeroMax, twin screw, M11 Cummins, 370 hp, 10 spd., air ride susp., 12,000 lb. front, 40,000 lb. rears, 4.11 ratio, 167” WB, 591,496 miles

1995 IHC 8200 single axle, M11 Cummins, 10 spd., 12,000 lb. fronts, 23,000 lb. rears

1995 Kenworth T800 twin screw, M11 Cummins, 10 spd., air ride, 12,000 lb. fronts, 40,000 lb. rears

1994 Freightliner F70 single axle, Cummins 8.3L, 150” WB

1991 Freightliner FLD120 factory day cab, 3406 Cat, 8 spd. with low hole, spring ride, recent shoes & brake drums

1991 Kenworth T600 twin screw day cab, 60 Series Detroit, Eaton 10 spd., air ride, wet kit, 11-22-5 on steel

1990 Freightliner FLD120 twin screw, day cab, 270 hp Cummins, 10 spd., PTO, spring ride, 12,000 lb. fronts, 34,000 lb. rears, 3.73 ratio, 180” WB, 22.5 rubber

1990 Kenworth T800 twin screw tri-axle with lifting front, 3406 Cat, 10 spd., 24.5s, aluminum fronts

1984 Ford L9000 day cab, 855 Cummins, 300 hp, 9 spd., spring ride, 11-24-5 on steel, air slide 5th, current DOT, OH engine

1984 Kenworth, day cab, C12 Cat, 15 spd., long frame

1977 Mack R, factory day cab, 238 engine, 5 spd., power steering, wet kit

1975 Ford LT9000 day cab, 290 Cummins, 13 spd., fixed plate, spring ride, 10:00-20 rubber on spoke wheels

SLEEPER SEMI TRACTORS

2005 Kenworth T800 twin screw, Aerocab Ext cab, VIT interior, Cummins ISM, 370 hp, engine brake, 12 spd. auto shift, 4.11 ratio, air ride cab, air ride susp. with dump valve, 180” WB, sliding 5th, 22.5s on all aluminum

2005 Freightliner Columbia twin screw, Detroit 14L, 515 hp, auto shift, 24.5s, polished aluminum

2005 Peterbilt 379 EXHD, 63” sleeper, C15 Cat, 475 hp, 10 spd., 265” WB, dual chrome air cleaners & exhaust

2005 Volvo VNL, sleeper, Cummins ISX, 450 hp., 10 spd., A/C, 12,500 lb. fronts, 40,000 lb. rears, air ride, 3:36 ratio, 215" WB, 606,173 miles, blue

(2) 2004 IHC 9200I twin screw, C13 Cat, auto shift, 22.5s, aluminum fronts

2004 Freightliner Columbia mid roof, 470 hp Detroit, auto shift, 22.5s, polished aluminum around

2003 Kenworth T800 twin screw, midroof, C15 Cat, Fuller 10 spd., engine brake, daylight doors, 22.5s, polished aluminum fronts

2003 Freightliner Coronado double bunk, 14L Detroit, 515 hp, RTLO 10 spd., sliding 5th, 22.5s, aluminum all around

2003 Peterbilt 379 ext. hood, 475C-15 Cat, 13 spd., 3:36 rears, air ride, air slide, full aluminum

2003 Freightliner Columbia mid roof, Cummins ISX, 10 spd., 22.5s, aluminum fronts

2003 Mack CH613 mid roof, 460 hp, 13 spd., air ride, 11-24-5s on aluminum, slight body damage

(2) 2002 IHC 9200I twin screw, 51” Pro Sleeper, C12 Cat, 410 hp, 9 spd., 3.58 ratio, 40,000 lb. rears, 207” WB, Premium interior, 22.5s on discs

(2) 2001 IHC 9200 twin screw, 51” Pro Sleeper, C12 Cat, 10 spd., 205” WB, polished aluminum fronts

2000 Volvo VNL 660 twin screw, D12, 425 hp, 10 spd., 3.70 ratio, 22.5s on aluminum

2000 Volvo VNL twin screw, mid roof, D12 Volvo, 465 hp, 13 spd., jake brake, heated mirrors, new 5th wheel plate, 22 low pros on aluminum, 3:55 ratio, 1,127,000 miles, fresh DOT

1999 IHC 9400 Eagle twin screw, Pro Sleeper, N14 Cummins, auto shift, 212” WB, 22.5s, polished aluminum

1999 Kenworth W900L 465 hp Detroit, 13 spd., 3:55 rears, air ride, air slide, recent engine OH with papers, full aluminum

1999 Peterbilt 379 removable bunk, 3406 Cat, 10 spd., 24.5s, aluminum fronts

1999 Kenworth T2000, twin screw, double bunk, 3406E cat, 475 hp, 13 spd., air ride, sliding 5th, leather seats, refrigerator, 24.5s on all aluminum, 40,000 miles on new injector & cam, 20,000 miles on new clutch

1999 Peterbilt 379 twin screw, Cat, 550 hp, 15 spd., 255” WB

1998 Volvo V10 twin screw, mid roof, D12 Volvo, 425 hp, 13 spd., new 5th wheel plate, 3:55 ratio, 11-24-5 on aluminum, (4) new batteries & new clutch, 200,000 on rear ends, 800,000 miles on motor, fresh DOT

1997 Freightliner 120 twin screw, flattop, N14 Cummins, 9 spd., engine brake, aluminum wheels around

1997 IHC 9300 Pro Sleeper, N14 Cummins, 13 spd., air ride, cruise, jake brake, diff, 24.5 low pros on aluminum, 230" WB, headache rack, fenders, rear hitch, new steers

1996 Kenworth T800B twin screw, 36" flattop, M11 Cummins, 10 spd., 3.90 ratio, wet

kit, daylight doors, 22.5s, aluminum around

1996 Volvo WIA64 tandem axle, flattop sleeper, VED12 Volvo, 425 hp, 10 spd., air ride, 3.70 ratio, 40,000 lb. rears, 24.5 low pros on aluminum

1996 IHC 9400 twin screw, mid-roof sleeper, Detroit 60 Series, 10 spd., 232” WB, 12,000 lb. fronts, 40,000 lb. rears

1996 IHC single axle, sleeper, Cummins diesel, 9 spd., new batteries

1995 Volvo WIA64 D12 Volvo, 425 hp, Super 10 spd., air ride, 3:70 rears

1994 Volvo WIA64TES 12.7 Detroit, Super 10 spd., air ride, 3:70 rears

1991 Freightliner twin screw, flattop, removable sleeper, Cummins 6 cyl., 9 spd., A/C, engine brake, air ride seat, sliding 5th, 24.5 Daytons, 698,000 miles

1990 Peterbilt 379 ext. hood, 425 Cat B, 13 spd., 3:55 rears, air ride, air slide, recent engine OH with papers, full aluminum

1997 Peterbilt 377, sleeper, 3406E Cat, 9 spd., set forward axle, 24.5s on low pros

1988 Kenworth T800, 42" sleeper, 350 Cummins, 9 spd., air ride, 3.90 ratio, approx. 780,000 miles

1987 Peterbilt conventional, removable bunk, 855 Cummins, 10 spd., air ride, air slide 5th, wet kit, air shift, 11-22-5 on steel, 400,000 miles

SPECIALTY TRUCKS

2005 Sterling Acterra single axle cab & chassis, factory day cab, C7 Cat, 210 hp., 6 spd., power steering, A/C, spring susp.

2002 IHC 4300 cab & chassis, DT466, automatic, 20' box specs, 22.5 tires

2000 IHC 4900 cab & chassis, DT466, automatic, 20' box specs, air ride, 22.5 tires

2001 Chevrolet 2500 HD crew cab utility truck, 4 door, 6.0 liter V8, automatic, 4WD, pintle hitch, Knapheide 8’ box, 140,000 miles

1998 IHC 2674 tandem axle, M11 Cummins, 300 hp, diesel, 8LL, rubber block susp., 4.33 ratio, 20,000 lb. front, 46,000 lb. rear

1995 Isuzu NPR with 16' enclosed box, roll-up door

1995 Chevrolet 3500, 6.5 liter diesel, 5 spd., power steering, A/C, 2,700 lb. crane 11’ service body, 124,147 miles

1994 Peterbilt tri-axle twin screw, 12.7L Detroit, 10 spd., 17' dump body

1991 Kenworth T800 tandem axle, 3306 Cat, 300 hp, 8LL, Hendrickson susp., 20,000 lb. front, 40,000 lb. rear, long wheel base, 22.5 tires

1990 Kenworth Heavy Spec, 3306 Cat, 8LL trans., 20,000 lb. front axle, 46,000 lb. rears, spring susp., long frame

1988 GMC Brigadier tandem axle rollback implement truck, BC4 Cummins, 315 hp, 9 spd., 4 spring susp., 12,000 lb. front, 40,000 lb. rear

1987 Mack Superliner, E7 Mack, 350 hp., 6 spd., power steering, spring susp., 16 ton Wilmar tender box, good runner

1986 Mack MR, COE, cab & chassis, 20,000 lb. front, 44,000 lb. rear, long wheelbase

1978 Chevrolet C65 bulk fuel, 1,500 gal. cap., runs good

1974 IHC Loadstar 1700 twin screw 2-1/2 ton implement truck, gas, 8'x24' hyd. tilt bed & winch

1966 Ford F700 pole drilling truck, rebuilt 391 engine, 4&2 spd., Continental 6 cyl. pup motor, flatbed, all hyd., 20" auger

1994 Ford LT9000 plow truck, tandem axle, L10 Cummins, plow & wing

1980 Ford L8000 plow truck, single axle, Cat 3208, plow & wing

Single axle yard spotter truck, automatic, hyd. 5th wheel, new paint, can be licensed and DOT'd

Divco milk truck, circa 60's, for parts only

GRAIN & BOXED TRUCKS

2004 IHC 9200 tri-axle twin screw, C13 Cat, auto shift, new Loadline 21' box, hoist, 22.5s, polished aluminum around

2003 Freightliner 112 twin screw, Cummins ISM, 10 spd., new 21' box, hoist

2001 Volvo VNM twin screw, Cummins ISM, 370 hp, 10 spd., new Magnum 20' box, hoist, polished aluminum around

2001 Freightliner 106 tri-axle twin screw, Detroit, 9 spd., 21' box, hoist

1995 Volvo WG64 quad axle, pusher & rear lift tag axle, M11 Cummins, 10 spd. OD, Volvo T-ride susp., 12,000 lb. fronts, 40,000 lb. rears, new 24' box, hoist, 3 pc. gate, rear dump, new heavy tread recaps, 315 on front

1994 Peterbilt tri-axle twin screw, 12.7L Detroit, 10 spd., 17' dump body

1990 Kenworth, Heavy Spec, 3306 Cat, 8LL trans., 20,000 lb. front axle, 46,000 lb. rears, spring susp., long frame

1975 Ford F880 tandem axle, 475, 5&2 spd., air brakes, 20' steel box, plumbed for drill fill, 10:00-20 tires, new fronts, 84,000 actual miles

1980 Mack Superliner twin screw with 3rd axle, 350 Mack, 9 spd., 22' box, hoist, combo gate, 11-24-5 rubber

2000 Volvo ACL64B tandem, M11, 400 hp, 6 spd. Allison automatic, 14' box, hoist, snow plow, sander, 58,000 gvw, 320,000 miles

2000 Volvo ACL64B tandem, M11, 400 hp, 6 spd. Allison automatic, 14' box, hoist, snow plow, 58,000 gvw, 315,000 miles

1980 Western Star twin screw gravel truck, 855 Cummins, 15 spd., spring ride, 16' aluminum gravel box, 11-24-5 tires

1970 GMC, 2-1/2 ton, 350, 2 spd., steel box, hoist, 41,000 miles

1968 Chevrolet C65, 366 V8, 5&2 spd., power steering, 16’ box, hoist, always stored inside

1964 Chevrolet 60 single axle, 2 ton, 283, 4 spd., 14-1/2' steel box, wood floor, 8.25 new grip tires

SERVICE TRUCKS

2001 Ford F350 dually service truck, 1 ton, diesel, automatic, service box & crane

2000 IHC 4700 service truck, T444 diesel, automatic, 12' Altech service body, below deck air compressor, factory 110 inverter, air hose reel, wireless remote work light, 94,000 miles

1995 Ford L8000 enclosed service truck, diesel, automatic, air compressor, 101,000 miles

1995 Chevrolet 3500 dually, 6.5L turbo diesel, 5 spd., maintainer flatbed service body, crane

1981 GMC Topkick service truck, Cat diesel, Allison automatic, Miller welder, gen set, air compressor, 400 gal. tank with pump

1975 GMC Sierra Grande 1 ton dually, 454, 3 spd. with low gear, service box, 12v, cherry picker & air compressor

PICKUPS

2006 Ford F350, ext. cab, long box, 6.0 liter diesel, automatic, 4WD, Class III hitch, 36,000 miles, title marked damaged

2000 Chevrolet 3500, crew cab, long box, 454, 2WD, A/C, power windows/locks, cruise, 5^th wheel hitch, 219,628 miles

2000 Chevrolet 2500, crew cab, 8’ box, 7.4 liter, automatic, 4WD, power windows/locks, leather, 144,310 miles

1999 Ford F350, crew cab, long box, 7.3 liter diesel, 4 spd. manual with OD, 2WD, A/C, 5^th wheel hitch, 380,592 miles

1998 Chevrolet 3500, 1 ton crew cab, 4 door, 5.7 V8, automatic, 2WD

1998 GMC 2500, cab & chassis, gas, 2WD, 116,000 miles

1997 Ford F150, reg. cab, long box, 4.2 liter, automatic, 4WD, A/C, cruise, 113,424 miles

2000 Peterbilt 377, day cab, steerable pusher, C12 Cat, 13 spd., headache rack, wet kit, 617,000 miles

1992 Ford F150 ext. cab, long box, 302 V8, automatic, 4WD, new tires

1991 Ford F350 crew cab, automatic, Waldoch conversion, 4WD, 5th wheel ball, bad transmission

1986 Chevrolet Silverado, 350 V8, automatic, 4WD, 15,000 miles on rebuilt motor 1986 Chevrolet, 3/4 ton, V8, automatic

1976 Dodge Club Cab with snow plow

HOPPER BOTTOMS

2005 FarmMaster steel tandem axle hopper bottom, 28', ag hoppers, spring ride, 11-22-5 on steel

1996 Cornhusker hopper bottom, 40’, ag hoppers, 20” electric sunrisers, new tires, brakes, drums, and S-cams

1993 Wilson aluminum hopper bottom, 43'x78” sides, 24.5s on steel discs

1992 Timpte Super Hopper hopper bottom, 42'x96"x84” sides, air ride, roll tarp, new tires, 11-22-5 on aluminum

1977 Cornhusker aluminum hopper bottom, 40', roll tarp, 24.5s on steel discs

SPRAYER, COMBINE & HEADER TRAILERS

Tandem axle sprayer trailer, 45'x12' wide, 5th wheel, 3,200 gal. & 1,000 gal. poly water tanks, (2) 100 gal. inductor/mixers, 3" Honda powered transfer pump with hose, LED

Donahue tandem axle combine trailer, 40,000 lb., pintle hitch, spring ride, folding ramps

1994 Bison double combine trailer, 53’, titled, VINTPSMN933551

Farris tandem axle folding header trailer, used for 30' heads

SSR Pump single pole header trailer, 30'

(2) Header trailers, 36', lights, fenders, new

Header trailer, 25', running gear style

DRY VANS

(2) 1989 Fruehauf single axle dry vans, 28', roll-up doors

1989 Great Dane dry van, 53'

1973 Fruehauf dry van, 45'

Enclosed semi van, 28'

1996 Fruehauf van trailer, 48’, for parts/storage only

STOCK TRAILERS

Blair gooseneck, 7'x18'

New CM steel, 7’x16’, 52,000 lb.

1978 Hale gooseneck steel tandem axle, 6x20

1986 WW gooseneck, 6'x16'

SEMI FLATS

1999 Fontaine Infinity combo, 48'x102", spread axle tandem, air ride, sliding winches, 24.5s on steel discs

1998 Utility combo, 48'x96", spread axle tandem, 24.5s on aluminum

1995 Utility combo, 48'x96", spread axle tandem, air ride, sliding winches w/straps, 22.5s on steel discs

1996 Utility combo, 48'x96", spread axle tandem, air ride

1988 Utility, 48'x102", sliding closed tandem, 22.5s on steel discs

1992 Manac quad axle with lifting front, 48'x102", sliding winches with straps, 22.5s on aluminum

(25) 1998 Wilson spread axle 48'x96" flatbed trailers, 10'2" spread axle, Hendrickson In-Track susp., 24.5 low pro rubber, 10,800 lb. empty

1994 Great Dane spread axle tandem trailer

1995 Reitnour flatbed, 45'x96", all aluminum, spread axle, air ride

Dorsey steel flatbed trailer, 46', spread axle, air ride

2002 Transcraft flatbed, 48'x96", combo, spread axle

2000 Transcraft aluminum combo flatbed, 48'x102", fixed spread axle, one side box, 11R22-5 tires

SEMI STEP DECKS & LOWBOYS

1998 Dynaweld single drop step deck, 48'x96”, spread axle tandem, air ride, 22.5s on aluminum

1996 Fruehauf single drop step deck, 48'x96”, spread axle tandem

1989 Lufkin single drop step deck, 48'x96”, spread axle tandem, sliding winches, 22.5s on steel discs

1991 Transcraft single drop step deck, 48'x96”, spread axle tandem, new virgin tires

2000 Aspen RGN, 48' lowboy, 29'-6" well, 70 ton, Apitong decking, 10' front deck, 8' rear, air ride, 22.5s on aluminum wheels, hookups for rear stinger, brakes & rubber 80%

1980 tandem axle lowboy trailer, 35 ton, with flip

1977 Transcraft tandem axle double drop deck

SIDE & END DUMPS

(2) 2004 Clement side dumps, 40' frames, 34' tubs, air ride, rear axle lift, RollRite elec. tarp system, 385-65R22.5 rubber on aluminum

1991 Montone frameless aluminum end dump, 38', swing back door, air ride, dump valve, 11-24-5s on spoke wheels, new brakes, cams, drums

1984 Fruehauf tri-axle with air lift, end dump, 35' with 32' tub, 3-way endgate, box vibrator, one yr. on brakes

REEFERS

1998 Trailmobile reefer, 48'x102", sliding tandem axle, Carrier unit, corrugated floor, 24.5 tires

1996 Utility reefer trailer, 53'x102" wide, tandem dual sliders, air ride, ThermoKing unit with 15,000 hrs.

1990 Utility reefer trailer

ENCLOSED TRAILERS

2007 Pre enclosed tandem axle trailer, 7,000 lb., rear ramp door, side door, electric brakes, emergency breakaway

2007 Interstate enclosed car hauler, 24', bumper hitch, V-neck with drop down back door & side door, maroon

2004 Continental cargo trailer, 20’, rear ramp door, side door, electric brakes, emergency breakaway

2000 Qualifier enclosed tandem axle trailer, 36'x102", 7'5" interior height, 48" side door, 12v & 110v power, drop down tailgate with beavertail, 12,000 lb. dead pull winch with remote

1996 Interstate tandem axle enclosed trailer, 15’, 3,500 lb. ea. axle, rear & side doors, electric brakes, emergency breakaway

WW enclosed tandem axle trailer, 20’, rear & side doors, 12,000 gvwr, electric brakes, emergency breakaway

Gooseneck enclosed trailer, 26'x8-1/2', white, double door, 8,000 lb. axles

OTHER TRAILERS

2004 L&L flatbed trailer, 24', full hyd. tilt bed, power winch, 14,000 lb.

Econoline tandem axle flatbed trailer, 25-1/2', spring ride, 30 ton, used for equipment hauling, pintle hitch

2001 ABU car trailer, 16', 7,000 lb., slide-in ramps

2007 Bear Track aluminum trailer, 2-wheel, 65"x120", 2' sides & ramp

Load Trail TD20FD70ET tilt bed trailer, power tilt

New Load Trail gooseneck trailer, 24', 14,000 lb. gvw, dovetail with 2 stand-up ramps

(2) New Load Trail gooseneck trailer, 32', 22,000 lb. gvw, dovetail, heavy specs, flip over ramps

New Load Trail gooseneck trailer, 32', 22,000 lb. gvw, dovetail, heavy specs, flip over ramps

New Load Trail tilt trailer, 20', 7,000 lb., steel floor, hyd. up & down

1993 Macl tandem axle trailer, 18', ramps, 12,000 lb. rating

2001 PJ gooseneck trailer, 25', two 7,000 lb. electric brake axles, red

1988 SCHM tandem axle, curtain side trailer, 36'x84" steel floor, 22.5 tires, all steel wheels, steel composition, lift gate, excellent for water tanks

2002 Road King skid steer trailer, 14', 7,000 lb. rating, new deck, black

2003 SledBed snowmobile trailer, aluminum salt shield, tie downs, 13" tires, ski track, traction mats

1996 SledBed trailer, 12'

1979 Thor tri-axle gooseneck trailer, 28', 4' dovetail, 9,000 lb., electric winch

Wisconsin equipment trailer, 13'6"x8', tilt deck, pintle hitch

1942 shop-built gooseneck trailer, 30 ton, military style, 16', new axles & lights  

Shop-built tri-axle trailer, 24', pintle hitch, 4' beavertail with ramps

Pup trailer, 400 bu.

2002 Triton ATV side load trailer

Tilt bed snowmobile trailer, 4x8

Shop-built tandem trailer, 16', tilt bed

AIR DRILLS

1999 Case-IH air seeder, 40', double disc opener, hyd. markers, All run monitor, new hoses last year, 2 years on discs, Case-IH 2400 tow between cart, twin 240 bu., 8" hyd. fill auger, hyd. fan, 23-1-26 Diamond tires

Great Plains GP1079K air drill, 45', twin commodity tank, solid packer wheel, shank-style, S/NGP1173K

Great Plains GP1079K air drill, 34', twin commodity tank, solid packer wheel, shank-style, S/NGP1242K

1998 JD 1860 air drill, w/JD 1900 350 bu. pull behind cart, has JD 1890 boots, 2,000 acres on discs & boots

1996 JD 730 air drill, 40' disc, 6" space, double harrow, sidearm markers, 230 bu. JD 787 commodity cart, tow between, hyd. fill auger, single owner

PLANTERS

2001 JD 1780 planter, 24x22", 3 bu. boxes, 750 liquid fertilizer tank, variable rate drive, SeedStar monitor, corn & bean discs, JD 777 tow-behind commodity cart, 170 bu., plumbed for on demand fill

1998 Kinze 2700, front-fold, 36x20", 1.6 bu. hopper box ext., monitor, markers

JD 7300 MaxEmerge, 12x22", 3 pt., lift assist, 1.6 bu. box, corn discs, 200 monitor

JD 7100, 12x22"

JD 7100, 12x30", vertical fold, lift assist, liquid fertilizer

JD 7000, 8x30"

White 6122, 12x30", vertical fold

PLOWS & PACKER

IHC 800 auto reset plow, 8-bottom

Brillion packer, 17-1/2'

Case-IH mtd. plow, 6x18"

IHC mtd. plow, 5x14"

Dearborn plow, 2-bottom

Moline antique plow, 3-bottom, very complete with coulters

TILLAGE EQUIPMENT

2004 JD 2210 field cultivator, 49’ 6”, pull-type, floating hitch, 6” spacing, accu depth, walking tandems, 5-bar spike harrow, S/NN02210X000333

2003 Wil-Rich V957 disc ripper, 18’, 10” points, Gates harrow, S/N455042

Case-IH 4900 field cultivator, 40', walking tandems, 4-bar Flexi-Coil harrow

Wil-Rich field cultivator, 38', 3-bar harrow, new teeth

IHC vibrashank cultivator, 28'

IHC vibrashank cultivator, 20'

IHC 45 field cultivator, 18'

King S-tine cultivator, 24', 3 pt.

Alloway RTS3300 seed finisher, 34', dual crumbler

JD 630 tandem disc, 32', 9" space, hyd. leveling, new blades, front gang

Wil-Rich chisel plow, 26'

Herman Superweeder 53' with Melroe 5-bar harrow sections

Melroe harrow, 60', hyd. fold

Harrow, 110', Melroe sections

Herman mtd. harrow, 35'

IHC 770 offset disc, 13'

Freedom tandem disc, 6-1/2', 3 pt., notched blades front & rear, S/NA40780105

Summers 3-bar harrow sections

Flexi-Coil harrow, 32’, 3-bar

Case PTX 600 chisel plow, 41’, 650 lb. trip shanks, floating hitch

SUGARBEET & ROW CROP EQUIPMENT

2007 WIC harvester, 8x22", poly grab rolls, row finder, rear scrub, new style struts, single owner, always shedded

2000 Artsway 692B, 8x22", row finder, S/N1299

Alloway defoliator, 6x22”, S/N16656

Alloway defoliator, 6x22", S/N1212

1996 Beetec defoliator, 12 row, L-knives, front drum, front gauge wheels, rear steer wheels, all updates, rotary scalpers

Alloway cultivator, 12x22", rolling shields

IHC rotary hoe, 44', 3 pt.

JD 400 rotary hoe, 20', 3 pt.

LIVESTOCK & HAY EQUIPMENT

2006 Patz TMR mixer, left hand discharge, 84" extension for unloading, chain conveyor, electronic scale, single owner

2002 Case-IH RBX561 round baler, hyd. tie, 1000 PTO, approx. 7,500 bales, S/N1528

2000 NH BR940 big square baler, hyd. pickup, moisture monitor, 2 bale accumulator, 600-55R-22.5 tires

JD 510 round baler

NH 499 haybine

Deutz Allis KS200 hay rake

Brady pull-type hay conditioner, PTO

Bearcat 1260 mixer mill, hyd. drive, hay table, electronic scale

Gehl 7335 feed/mix wagon

1982 Betterbuilt single axle honey wagon, 1,300 gal.

Gehl 95 feed grinder

Knight 330 mixer wagon, scale & conveyor

NH 355 mixer mill, needs work

(5) New hay lumber tarps, 27'x24', 9' flap on one side, black

(15) New hay lumber tarps, 27'x24', 9' flap on one side, red

(80) 20' sections CF new continuous fence, 6-bar with connectors & clips

Posthole auger, 3 pt., 540 PTO

Bale fork, 3 pt.

Fiberglass hog waterer, 100 gal.

Hog feeder, 12 hole

Mighty Handy cattle chute

(5) Livestock gates

Apache hay wagon, 24’

(3) Smidley Steer Stuffer cattle feeders, 3 ton

Osborne portable scale

AUGERS

Westfield MK130-91, 91'x13", PTO, swing hopper

2002 Westfield MK, 91'x13", low pro swing hopper

Feterl auger, 78’x12”, side auger

Westfield MK, 71'x10" with 2 yr. old Mast Production Pit Express swing out drive over hopper system

Westfield MK, 61'x10", swing out hopper

Brandt auger, 60'x10", mechanical swing hopper, PTO, blue

Rapat conveyor, 14' with 8" belt

Rapat conveyor, 15' with 7" belt

Speed King conveyor, 11' with 11" belt, 1 hp motor

Westfield endgate drill fill auger

Wheatheart transfer auger, 10", 2 hyd. motors

Conveyor, 12' with 9" belt & motor

GRAIN HANDLING EQUIPMENT

Conveyall BTS240 seed tender, double compartment, Honda gas engine

Handlair 555 grain vac, piping & cleanup kit

Neuero 675 vacuvator, 1000 PTO, tubes & ends

Hi-Cap grain screener with screens

(2) Hutchinson rotary screen grain cleaners

Rotary drum cleaner, 36", single phase

Keho natural air drying system, blower, tubing for (4) bins

Sukup stirator for 21' dia. bin, complete with 3 vertical augers & electric motors

(2) Vane 12" axial bin fans with motor & transitions

(2) Caldwell bin fans, 230 volt

Bin fan, 14", 1.4 hp

(2) Bin fans, 12", 1 hp

Westgo new-style bin sweep ext., 3'

(2) Bin transitions for 12" fan

(3) Grain spreaders for bins

Aeration tubing, (10) 12"x3'

Aeration tubing, (8) 12"x4'

Auger hopper

Hyd. takeout power head, 7", for 18' bins

12" to 14" transition and through bin mount

(3) 12" through bin mount transitions

(2) 7" bin takeout tubes for 18' bins, mounting plates

Drill fill tubes

Sukup bin fan, 30”, with new motor

Heated dryer

HandleAir blower

Snowco grain cleaner, 8’

Sectional grain drag auger

MOWERS

Bush Hog batwing mower, 15'

Woods 3180 batwing mower, 15'

Woods 315 batwing mower

Farm King finishing mower, 3 pt.

1991 Gehl 521 trailing sickle mower, 9'

Woods 59 belly mower, mounts for IHC B

SCRAPERS, LAND PLANES, BLADES, DITCHERS

2004 Miskin D19 pull scraper, 17 yd., S/N21671

Caterpillar 70 direct mount scraper, 15 yd., hyd. conversion

2003 Torque 1014D direct mount scraper, 14 yd., hyd. push off, hitch for JD

Pull-type box scraper, 12', new

Pull-type box scraper, 10', new

Eversman land plane, 42' long, 12' bucket

Heavy-duty tilt blade, 8', 3 pt.

KeeWay rotary ditcher, 3 pt., 540 PTO

Rotary ditcher, 3 pt.

Scraper, 2 yd.

LAWN & GARDEN 

1988 JD 855, 24 hp, hydro, 72" mower deck, 1,295 hrs., S/N1475161

2003 Simplicity Broadmoor lawn tractor

(2) 2001 Snapper LE lawn tractors, 14 hp, 38" deck

Toro GM327, cab, SB, deck

Big Mow lawn tractor, elec. start Briggs

Herd broadcast spreader, 3 pt.

Lawn cart, 4-wheel

Bagger for riding lawnmower

MC 519 grass catcher, fits JD mower

Spreader, 3 pt.

SNOWBLOWERS

Alloway SB96, hyd. spout, 3 pt.

Erskine, V-type, 7', 540 PTO

Erskine, 5-1/2', wing, 3 pt., 540 PTO

Feterl, 8', double auger

Hiniker, front-mount, 8', hyd. chute, off IHC 966

JD 832 walk-behind

Kubota T2541, front hyd.

Lilliston, V-type push/pull snowblower, 3 pt.

McKee 750, 3 pt., 2-stage

McKee, 8', 2 stage, hyd. spout, 3 pt., 540 PTO

McKee, hyd. spout, 3 pt., 540 PTO

Noma, 10 hp, 33" cut

Schulte, front-mount, 1000 PTO, mounts for 2 wheel or MFWD

Schulte, 96", 3 pt., 1000 PTO

Loftness 108, 3 pt., 1000 PTO

Rear-mount, single stage

Snowblower, 40" single stage, fits 22 hp Yard King lawn tractor, S/N579788

STALK CHOPPERS

2007 Wil-Rich flail chopper, 22', drawn, 1000 PTO, S/N457557

Wil-Rich shredder, 3 pt., 22', L-knife, 1-3/4 PTO, 4 gauge wheels

1999 Alloway stalk chopper, 20', 3 pt., S/N24107

Brent stalk chopper, 30', hyd. fold, trailing

OTHER EQUIPMENT

Jackson swather transport

P&H 2804A 4-wheel running gear, (6) front springs, 12L-15 tires, S/N74340

John Blue mechanical nitrolator

(2) 24 outlet NH3 manifolds with stands

(2) Tecumseh gas engines, 10 hp, new, elec. start

Concord soil sample probe

5th wheel dolly

Galvanized irrigation pipe, 2"x21'

Set tractor chains, 13-6-28 rears

(2) Base, (9) Johnson radios with brackets & antennas

(2) Motorola CM200 radios, new in boxes

CONSTRUCTION ITEMS

2008 Sweepster front-mount broom

(2) Scoot Crete ride-on power buggies, 1 yd.

Sullair compressor, 150 cfm, older unit

Jumping jack

Plate tamper

Construction site office, 10x32, trailer needs some work

Scaffolding for lift, 4'x12'

(2) 10' ext. forks for lift

(3) Sets 6' scaffolding

(2) Aluminum planks for scaffolding

(5) Lineman harnesses

TANKS & PUMPS

Wayne 440 DC10-1 free-standing 2-sided diesel pump

Gasboy free-standing gas pump

Honda 3" pump, 11 hp

Bulk fuel filling pump hose & nozzle, (Marlow pump)

Pleasure Products 2,000 gal. tank

1,400 gal. water tank

(3) 1,000 gal. upright poly water tanks

500 gal. fuel tank on skids

560 gal. portable fuel tank, high volume 1" electric pump, hose & nozzle, new generator to power pump

Fuel service tank, 2 comp. with toolboxes, hand pump & hose

Aluminum service unit, 90 gal. tank & toolbox

Pickup saddle tank with toolbox on top

240 gal. mix tank

35 gal. cone tank

70 gal. cone tank

Demco saddle tanks, 250 gal., brackets, always shedded

SHOP EQUIPMENT

Airco Dip-Cor 300 wire feed welder

Alkota hot water power washer, 220v

Coleman air compressor, electric, 5 gal.

Coleman LP heater, 70,000 btu, for trailer or bunk house with floor discharge

Midland Door new garage door, 9' high x 8' wide, new rail system

Pro-Tech table saw, 10"

Pro-Tech miter saw, 10"

Ryobi miter saw

Sun fuel oil shop furnace

Tool Shop router

Trane heat pump for home, 2 ton unit

Wagner 110v power painter

Wild Thing chainsaw, 16"

Winco late model generator, PTO, 25,000 watts, 104 amps, 100 amp plug, on 2-wheel cart

Winpower generator, 12,000 watt, PTO

Winpower 12 kw PTO generator on cart

Winch, 110v

(8) Insulated door panels, 28'x8', 3" foam

Generator, 4,000 watt

(2) 20' ext. ladders

Asst. misc. lumber

Single hung window, 4' high x3' wide, new

Fiberglass stepladder, 6'

(2) Roofing nailers

Level, 6'

Router table with router attached

Tote box for pickup box

Bench model drill press, 5 spd.

Car ramps

Chain hoist, 1 ton

(4) Generator, 8000 watt, 4-stroke, elec. start, roll cage & wheels

(2) Commercial grade diesel generators, 6800 watt, EPA approved, electric start, 4 stroke, low oil alert system

(6) Retractable air hose reels, 50', max working pressure 300 psi

(3) Chain hoists

McCullough portable generator frame

PTO generator, 27,000 watt

Devilbiss portable generator, 5,000 watt

Hobart welder

(2) Lincoln Union carbide welders

Fabstar 4030 arc welder

Lincoln Idealarc R35 welder

Lincoln FTC W27 welder

Coleman Powermate portable generator, 6,250 watt

Coleman Vertex portable generator, 5,500 watt

Wood lathing machine

Curtis horizontal air tank

Vertical air tank

Metal service rack with casters

Power washer parts

Pallet (9) fluorescent light fixtures, 9’ with bulbs

VEHICLES & RECREATION 

1998 GMC 3500 Bluebird bus, 5.7 liter Vortec, automatic, 20 passenger cap., est. weight 7,350 lbs., 188,000 to 210,000 miles, starts & runs good

2000 Pontiac Montana extended van, 6 cyl., automatic, buckets, new tires, 157,000 miles, white

1995 Jeep Cherokee, 4-door, 6 cyl. 4 liter, 4WD, 140,000 miles

1986 Oldsmobile Delta 88, 4-door, weak transmission

1985 Chevrolet Monte Carlo, V6, automatic

1982 Chevrolet Camaro Indy Pace car, T-tops, 305 engine, automatic on floor, grey/blue, new dual exhaust

1998 Polaris Indy XCR440 snowmobile

1995 Bayliner boat, 19'6", 4.3 inboard engine, cracked head

Cabin, 8x16 with loft, perfect for hunting or dryer shack

(2) Childrens' playhouse cabins, 6x10 with porches & lofts

Fish house, retractable axle, 8-hole, front storage bay, rear cargo doors

Heald Hauler Mark HX4660 ATV, gas, 2x4, newer motor, 800 lb. box load

PARTS  

(2) ThermoKing Tri-Pacs

(2) Aluminum headache racks

Unused Cummins N14 engine

3rd axle, air up/down

(2) GMC long box pickup boxes

Camoplast 16" tracks, JD 8000T Series, approx. 40%

(24) JD wind guards

Schwartz HP2203 truck hoist

Fargo markers

JD concave for 9400 or 9500 Series combine

Hyd. cylinder, 5x30", one broken end, great for log splitter

Tractor seat, complete, for Case-IH 2290

Set camper mirrors, fit 1999-2005 Chevrolet & GMC, fit over existing mirror

(15) Pallets of asst. electric motors, gas engines, misc. parts

Add-on bottom for IHC plow, 7-bottom

(4) Pallets of pallet racking & beams

Several pallets electric motors & gear reducers

Set truck fenders

Cab for JD 4020

Asst. rolls heavy rubber conveyor belting

Set of JD fenders for 4020

(2) hyd. cylinders, 5"x52"

(2) Pusher axles

(55) Steel press wheels from IHC 8500 hoe drill

Eaton Fuller T14607B truck trans., 7-spd., good takeout, Spec 84025063

Eaton RS402 rear truck differential, 4/11 gear ratio, good takeout

Eaton DS402 front truck differential, 4/11 gear ratio, good takeout

NH3 rear-mount cultivator hitch

Eaton Fuller Model T14607B truck trans., 7 spd., Spec 84025063, good takeout

Eaton RS402 rear truck differential with 4/11 gear ratio, good takeout

Eaton DS402 front truck differential with 4/11 gear ratio, good takeout

Reeves MAS51 gear box with motor

Curtis CRV200 vacuum pump

Approx. 20 pallets asst. electric motors, gas engines, misc.

TIRES

(75) 22.5 & 24. 5 tires

(4) Sets (16) 445/22.5 Super Singles on aluminum rims

Armstrong duals, 20-8-38 with hubs for IHC 86 Series

(3) Goodyear 18-4-42 tires

(8) Goodyear 20-8-42 tractor tires, 40%

Michelin triples, 530/85R38, for Case-IH 9300 Series 4WD, 90% tread

(24) Pallets misc. tires

18-46-46 drivers & duals for JD

14-9-46 duals

(4) Aluminum rims, 16", fits 1999 GMC or Chevrolet

Band duals, 12x38 with hardware

General GR78-15 tire on 5-bolt GM rim

Goodyear Wrangler P265/75R16 tire on 6-bolt GM rim

(2) Sets band duals, 18-4-34 & 15-5-38

Set of Ford 33" tires with Rally rims

Misc. tires & rims, approx. 50% on pallet

(2) single rib 11.25-28 rim & tires

(2) 10:00-20 tires & rims

9:00-20 tire & rim

(2) JD 11.00-16 front tires & rims

MISC. ITEMS

Bulldog antique fanning mill, great for corn burners

IHC stationary engine

Barrows wood handcart

Spinks Paddle Dash Pot Toledo platform scale

(2) Old platform scales

(3) Large coal shovels with wheels

(3) Bulk oil tanks with hand pumps

(2) Overhead garage doors, 9’x7’, w/electric openers